top of page

Marine Industry

HUSKEY™ TUFF STUFF GREASE

Description

HUSKEY TUFF STUFF is a new generation grease designed for today's demanding industries. It represents the "state of the art" in grease technology, combining the finest base oil stocks, additives and synthetic thickeners available to provide a truly multi-service, friction reducing, non-melting grease with unmatched protection in normal and severe service applications. HUSKEY TUFF STUFF is a blend of the highest quality paraffinic base oils and polymers coupled with HUSKEY'S newest proprietary extreme pressure additive which forms a tough durable film of protection from friction, wear and corrosion over a wider temperature range (-20°F. to 540°F). HUSKEY TUFF STUFF'S unique formulation provides superior adhesion to metal surfaces that does not easily wash off, run out or separate even under adverse conditions of water, steam or dilute chemicals thus providing lower grease consumption and extended lubrication cycles.

Advantages

  • WITHSTANDS EXTREME PRESSURES

  • WIDE TEMPERATURE RANGE

  • EXCELLENT METAL ADHERENCE

  • PREVENTS RUST & CORROSION

  • REDUCES FRICTION & WEAR

  • WILL NOT MELT OR RUN OUT

  • HIGHLY WATER RESISTANT

  • REDUCES GREASE INVENTORIES

Usage

HUSKEY TUFF STUFF provides unmatched performance in a wide variety of conventional and severe service applications found in a diverse range of industrial, marine, mining, construction, agricultural and automotive applications. HUSKEY TUFF STUFF is recommended for all roller, sleeve and pillow block bearings, bushings, couplings, universal joints, and sliding surfaces where a multi-purpose or extreme pressure grease is required. The use of HUSKEY TUFF STUFF can allow you to reduce your grease inventory.

HUSKEY™ WIRE LINE DRESSING

Description

HUSKEY WIRELINE DRESSING is a heavy duty, tenacious, semi-synthetic penetrating grease fortified with sub-micron size particles of Molybdenum Disulfide (Moly) and Graphite. This high performance liquid grease goes on as a liquid to penetrate to the core of the wire rope. After it penetrates and coats the metal surfaces, the carrier solvent evaporates, leaving behind a tough, durable grease film that protects under the most adverse conditions.

HUSKEY WIRELINE DRESSING completely protects the core of wire rope and all metal surfaces from moisture, chemicals, salt water and other corrosive conditions. The balanced blend of lubricating solids and extreme pressure additives provides excellent lubricity and low coefficient of friction to minimize excessive shock loads and reduce wear.

Advantages

  • Penetrates

  • Withstands Extreme Pressures

  • Wide Temperature Range (0°F to 450°F)

  • Extremely resistant to Water Washout

  • Excellent Metal Adherence

  • Will Not Melt or Run Out

  • Reduces Wear

Usage

HUSKEY WIRELINE DRESSING is designed primarily for wire rope and cable protection and lubrication. Excellent results have been found on application to open gears, roller chains, sliding surfaces, gibs, guides and ways, etc., where a liquid application is required or preferred. HUSKEY WIRELINE DRESSING is easily applied by spraying, brushing or dipping.

HUSKEY WIRELINE DRESSING penetrates deep into the core of wire lines carrying the oils and lubricating solids to provide maximum protection from wear due to twisting, bending, and stretching.

 

Typical Specifications

  • Product:  WIRELINE DRESSING

  •  

  • Color: Black

  • Base Oil: Semi-Synthetic

  • Thickener: Synthetic

  • Appearance: Black Fluid as received

HUSKEY™ DYNA-MITE RED GREASE

Description

HUSKEY DYNA-MITE RED GREASE is a unique high-temperature, extreme pressure, non-melting premium quality grease designed for very heavy-duty service in adverse environments. It is a blend of high quality petroleum oil and special synthetic polymers which work together to form an extremely water-resistant, tough lubricating film that prevents water washout and metal-to-metal contact even under extreme pressure or shock loading. HUSKEY DYNA-MITE RED GREASE is formulated with the optimum amounts of additives to provide maximum protection against rust, corrosion and oxidation. HUSKEY DYNA-MITE RED GREASE contains no fillers or clay thickeners. The distinctive red color makes it easy to identify during and after lubrication.

Advantages

  • WITHSTANDS EXTREME PRESSURES

  • WIDE TEMPERATURE RANGE (10°F TO 525°F)

  • EXTREMELY RESISTANT TO WATER WASHOUT

  • EXCELLENT METAL ADHERENCE

  • WILL NOT MELT OR RUN OUT

  • PREVENTS RUST AND CORROSION

  • REDUCES WEAR   

Usage

HUSKEY DYNA-MITE RED GREASE with its unique qualities can be used in a wide variety of applications, thus reducing the number of lubricants you must keep on hand. Some such applications include ball and roller bearings, bushings, slides, valve operators and bearings, gears, screw drives, couplings, cranes and general lubrication, especially where loads may be quite heavy and speeds slow.

SLIPKOTE® MOC-1

Description

SLIPKOTE MOTOR OIL CONDITIONER-1 (MOC-1) is a specially formulated premium crankcase oil conditioner. It is designed to quiet valve and lifter noise, reduce oil consumption and increase horsepower by enhancing the viscosity and protection of the motor oil at both normal and extended high temperature operation. SLIPKOTE MOC-1 utilizes special proprietary additives that chemically plate the metal surfaces against wear and scuffing, thus lowering maintenance costs and increasing the life of the engine. SLIPKOTE MOC-1 contains active anti-oxidation ingredients that increase the oxidation properties of the motor oil and help to neutralize the corrosive combustion formed acids that damage the engine. SLIPKOTE MOC-1 does not contain any chlorinated paraffins or lead compounds that can increase combustion acid formation.

Advantages

  • HELPS QUIET NOISY ENGINES

  • REDUCES OIL CONSUMPTIONT

  • LENGTHENS ENGINE LIFE

  • REDUCES EXHAUST SMOKE

  • REDUCES FRICTION & WEAR

  • INCREASES HORSEPOWER

  • LOWERS MAINTENANCE COSTS

  • INCREASES FUEL ECONOMY

Usage

SLIPKOTE OIL CONDITIONER-1 (MOC-1), when added to the crankcase oil, improves the ring and valve stem seals which restores compression, reduces oil consumption & exhaust smoke and increases fuel economy. SLIPKOTE MOC-1 is recommended for use with gasoline and diesel engine motor oils in both older and new cars, trucks , tractors and vans.

Directions

Pour one 12 ounce bottle of SLIPKOTE MOC-1 into 4-6 quart capacity crankcases (or approximately 2 ounces per quart) at each oil change.

HUSKEY™ N-500 SERIES OILS

Description

HUSKEY N-500 SERIES OILS are a blend of highest quality selected paraffinic base oils coupled with the finest rust and oxidation resistant additives available. This unique combination produces an exceptional lubricating oil with excellent thermal stability and low carbon forming characteristics. Formulated with only high-viscosity index oils to minimize viscosity changes during high and low temperature variations. These oils have extremely high film strength, to keep working metal parts separated, thus reducing friction and wear. Compounded to meet service requirements of Denison HF-2 and Cincinnati Milicrons high temperature heat stability test.

Advantages

  • Minimal Viscosity Change at Operating Temperatures

  • Rust and Oxidation Protection

  • Low Carbon Forming

  • Compatible with Sealants and Painted Surfaces

  • High Film Strength

  • Reduces Friction and Wear

  • Extends Equipment Life

HUSKEY N-500 SERIES OILS were designed primarily for all types of Air Compressors requiring non-detergent oils. These versatile oils are offered in several viscosity grades to meet the different needs of reciprocating, centrifugal and rotary compressors. Because of their anti-wear, anti-foam and excellent stability characteristics, they show outstanding performance when used as turbine oils, drip oils, hydraulic oils or general purpose lubricating oils.

HUSKEY™ OPEN GEAR GREASE

HUSKEY OPEN GEAR GREASE is a heavy-duty, highly tenacious, semi-synthetic open gear lubricant containing a balanced blend of molybdenum disulfide (moly) and graphite, incorporated in a non-asphaltic, non-melt base grease that contains no clay fillers. Treated with the most modern additives to provide lasting protection against extreme pressure, wear, rust, and oxidation on gear faces and sliding surfaces operating in temperatures from -5°F to 425°F.

  • PLATING ACTION is established between metal surfaces by the lubricating solids that develop a smoother surface. Working lives of both the parts and the grease are substantially increased.

  •  

  • CONTACT LUBRICATION with the lubricating solids prevents grease film failure due to unexpected loads, start-up or other conditions which may exceed the load capabilities of the bulk film lubrication. Contact lubrication protects the working surfaces from excessive wear caused by cold welding.

  •  

  • REDUCED WEAR and increased parts life are results of the protection provided by the lubricating solids.

  •  

  • COST REDUCTION is accomplished by increased parts life, less downtime and extended lubricating cycles.

  •  

  • FRICTION IS LOWERED, reducing contact area temperature, resulting in increased life of both equipment and lubricant.

Typical applications of HUSKEY OPEN GEAR GREASE include all open gears, sliding surfaces, gibs, guides and ways, forging hammers, kilns, and is an excellent cable dressing.

bottom of page